Seiko TM-L60 Manual del operador descargar pdf (Pagina 44)

- A horizontal tab position is stored as the absolute value

of (character width X n) measured from the beginning of

the line. The character width includes the character right-

side spacing, and double-width characters should be set

with twice the width of normal characters.

- Up to 32 tab positions can be set. Data which exceeds

32 tab positions will be ignored.

Set <n>k in ascending order and place a NUL code <00>H

at the end.

- ESC D NUL clears all tabs. Any HT commands received

after clearing will be ignored.

- When a data value <n>k is less than or equal to the preceding

value <n>k -

1, the setting is considered to be finished.

In this case, the following data is processed as normal data.

- When a data value <n>k exceeds the number of

character printable on one line, set [(column number) =

(the number of maximum printable columns) + 1].

- Horizontal tab positions remain unchanged if the character

widths are changed after setting the horizontal tab positions.

- The default tab positions are at intervals of 8 characters

(9th column, 17th, 25th,---) for Font A.

ESC J n

Print and feed paper using minimum units

< 1B >

< 4A >

< n >

Prints the data in the print buffer and feeds the paper n/360

inches.

- The predetermined line spacing remains unchanged.

- Sets the print starting position to the beginning of the line.

- Not defined.

5-3 Miscellaneous Notes

-37-

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 84 85

Sin comentarios

Seiko TM-L60 Manual del operador Pagina 44