Seiko U590 - TM B/W Dot-matrix Printer Manual del operador descargar pdf (Pagina 19)

Setting Up the Printer 1-7

Connecting the Display Module

Plug the cable connector (provided with the direct connection

display module) securely into the printer’s display module

connector until it clicks.

CAUTION:

Be sure not to connect this cable to the drawer kick-out

connector, which is to the left of the power supply

connector. Do not connect a telephone line to the

display connector. If you do, the printer and the

telephone line may be damaged.

Notes:

To remove the cable, squeeze the connector and pull it out.

The display module can be used only for the serial interface.

Grounding the Printer

You need a ground wire to ground your printer. Make sure that the

wire is AWG 18 or equivalent.

1. Make sure that the printer is turned off.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

Sin comentarios

Seiko U590 - TM B/W Dot-matrix Printer Manual del operador Pagina 19