Seiko LP-1020L Guía de usuario descargar pdf (Pagina 20)

How to input an original

●

How to input an original/Routine maintenance

LP-1020-MF/LP-1020L-MF

Adjust the position of the original width guide.

Adjust the original width guide to the applicable line

according to the original size.

Note

◆ This device allows you to select whether the

original is returned to the front or the rear of the

scanner. In case of front return, the original could

be damaged if the original width guide is in its

way. Accordingly, move the original width guide

to the right end if selecting this option.

◆ In this device, the original must be positioned in

the center. The non-fixed size original must also

be positioned in the center.

Input the original.

Input the original facedown along the original width

guide. The inserted original is automatically pulled in

the device and set in position.

◆ Butt the original against the front roller and

give it a slack, so

that the original

can be inserted

straight.

Note

◆ If you selected the front reject of the original, set

the original, aligning with correct size line.

◆ If a carrier sheet is used, do not select the front

outlet of the original. The carrier could get stuck,

causing the original to be damaged.

Original width guide

Slack

Roller

Removing scanner exit guide

◆Removing scanner exit guide

When scanning a long original or rounded original from the

rear, remove the scanner exit guide before scanning.

Open the scanner cover.

Lift the scanner cover up to its stop position. Pull the

stopper towards the arrow direction and raise the

scanner cover. The scanner cover will be held.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Comentarios a estos manuales

Sin comentarios

Seiko LP-1020L Guía de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Papel Plotter Seiko LP-1020L