Seiko LP-1020L Guía de usuario descargar pdf (Pagina 24)

Note

◆ If you move the toner cartridge from a cold to a

warm location, leave it in room temperature for

over three hours before using it.

◆ After replacing the toner, try to use it up within a

six month period. A toner cartridge installed for

an extended period of time will degrade the

drawing quality.

◆ Keep toner cartridges in a cool, dark place.

◆ Use only genuine toner cartridges.

◆Toner replacement procedures

Note

◆ Toner should be replaced only when the device

power is On.

If the toner is replaced while the power is Off, the

device will not be able to detect the amount of

toner and an error status will not be cancelled

even when toner has been replaced correctly.

◆ Replace toner after plotting finishes. Replacing

the toner during plotting may cause the operation

to stop and the plotting data to be lost.

Open the scanner cover.

Lift the scanner cover up to its stop position. Pull the

stopper towards the arrow direction and raise the

scanner cover. The scanner cover will be held.

(for LP-1020-MF only)

Remove the scanner exit guide.

(for LP-1020-MF only)

Lift and pull the guide toward the rear to remove while

the cover is open.

● Maintenance

Replacing the toner cartridge

When there is no more toner availabe, the Toner lamp will go

out, the Error lamp will come on, and plotting will no longer

be possible. The following message appears on the LCD.

If the Toner lamp starts flashing or The ERROR message

appears, replace the toner according to the procedures

indicated below.

◆ When you open the toner door, you will find

a “Toner replacement” label affixed to the

inside surface. Refer to this when replacing

toner.

◆ After the Toner lamp starts flashing,

approximately 50 m of plots can be

produced at normal size and density.

Note

◆ If plots with a high printing rate—such as

drawings containing many solid print areas and

inversed (black and white inverted) drawings—

are printed just before the toner runs out, the

toner may be used up and the device may be

damaged.

To avoid such a case, refill toner as soon as

possible when the toner lamp is flashing.

◆Precautions on handling

Warning

◆ Do not throw empty toner cartridges into fire.

Doing so may cause accident and fire.

Put the waste cartridge into the wrapping

contained in the toner cartridge package and

dispose of it as non-burnable garbage.

Caution

◆ Do not drop and tap the toner cartridge with force.

Doing so may cause the toner to leak from the

cartridge.

◆ Do not directly touch the toner. If the toner gets

on your skin or clothing, quickly wash it off with

water.

◆ Take care not to get toner in your eyes or breathe

it in. If the toner gets in your eyes, wash your

eyes out with lots of water and consult your

physician.

Panel messages used in this manual refer to those used in LP-1020/LP-1020L.

Kanji is also used in LP-1020-MF/LP-1020L-MF to improve the ease of reading messages.

Se t Toner Ca r t r i dge

Open Leve r

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

Comentarios a estos manuales

Sin comentarios

Seiko LP-1020L Guía de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Papel Plotter Seiko LP-1020L