Seiko LP-1020L Guía de usuario descargar pdf (Pagina 25)

3 Maintenance

Close the scanner cover.

(for LP-1020-MF only)

While supporting the scanner cover with your right

hand, release the stopper in the middle with your left

hand and close the scanner cover slowly.

Slowly close the scanner cover completely until it

clicks.

Open the toner cover.

Take out the new toner cartridge from the

package.

Mix the toner by shaking the new toner

cartridge.

Shake it strongly up, down, left and right, five or six

times.

Set the toner cartridge into the main unit.

Pull the lever to the right end.

At this time, the following message appears on the

LCD. After performing the procedure

operation,

return the lever and remove the toner cartridge.

If the above message does not appear, check to see that

the lever has been pulled up to the right end.

Tap the cartridge to allow toner to drop down.

Return the lever to the left.

CLOSE LEVER

REMOVE CARTR I DGE

1 2 ... 20 21 22 23 24 25 26 27 28 29 30

Sin comentarios

Seiko LP-1020L Guía de usuario Pagina 25