Seiko RP-E10 Series Guía de usuario descargar pdf (Pagina 30)

- 27 -

11 SETTINGS WHEN USING 58mm PAPER WIDTH

(1) Turn the printer OFF.

(2) Pull the release lever to open the paper cover.

(3) Remove the coin screw of the paper width setting knob at the Position A, move the knob to the

Position B, and then fix it with the coin screw again.

(4) Set the accompanying partition plate and the spacer plate to the position as shown in the figure.

See "RP-E10 SERIES THERMAL PRINTER TECHNICAL REFERENCE" to set the paper width (MS2-6) to 58 mm.

NOTE

- Set the paper width before using the printer for the first time. Do not change the paper

width after starting to use the printer.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Sin comentarios

Seiko RP-E10 Series Guía de usuario Pagina 30